Kompresor Gas Pemulihan Gas Industri Kompresor Bahan Sf6 Bebas Bahan Bakar

• Penggunaan: Hidrogen, Nitrogen, Oksigen, Ozon
• Tujuan: Gas Filling
• Komponen: Katup
• Bidang Aplikasi: Energi Baru
• Tingkat kebisingan: Rendah
• Ukuran Alat berat: Sedang
• Kondisi: Baru
• Sertifikasi: ISO, CE
• laju aliran: 2 300nm3/j
• tekanan masuk: 4bar
• tekanan keluar: 150 bar
• jumlah tahap kompresi: 4
• jumlah silinder: 4
• pelajaran berharga: pelumasan vertikal bebas oli
• cara pendinginan: udara/air
• jalan: sabuk
• tegangan: 220v/360v/380v/415v/440v 50/60hz
• standar: /13485/ce
• Paket Transportasi: Wooden Case
• Spesifikasi: large
• Merek Dagang: Cape-Golden
• Asal: China
• Kode HS: 8414901900
• Kapasitas Produksi: 100

Deskripsi Produk

 

 

Introduction

Small vibration, low noise, long service life of consumableparts, continuousoperation; pureofthecompressed gas , no secondary pollution, used for pharmaceutical, chemical, food, scientific research,  and other fields of process gas compressor,also can be used for air separation industry of gas pressurizing cases.
Cape-Golden brand series oilless hermetic compressoradopts hermetic construction for its motor without pollutino to the medium to be compressed and withouteakage.The series compressor has numerous advantage of reliable performance,simple opration,compact construction,quick connection etc.and thus is deeply favored by the users.It can be applied in the compression and recovery of toxic,rare and precioues gases helium,methane,ammonia,freon,carbon dioxide etc.
 

 

 

 

 

Main Technical Parameters

Main Parameter
1. Intake Pressure:0-3.0MPa
2.Exhaust Pressure:≤30MPa
3.Motor Power:45-110KW
4.Compressor Speed:300-580r/min
5.Compression series:1-4
6.Throughput:500-3000Nm³/h
7.Cooling Way : Air or Water 
 

 

 

Oxygen Compressor Protection

 

1. The operator must hold the corresponding electrician operation certificate, and work under the guidance of electrical technicians. Power supply must be cut off before electrical maintenance, and special person monitoring and warning signs should be set up. 
2. During the operation of the High Pressure Gas Compressor, do not touch the moving parts such as the transmission belt and fan wheel, and do not touch the cylinder wall, air pipe, and water pipe to avoid scalding.

 

Presentation