Key Technology
1. Heat treatment product: perovskite battery, applicable product size of this equipment: 300mm × 300mm long × Wide), other sizes can be customized
2. Effective height: 20mm (10mm above and 10mm below)
3. Service temperature: RT ~ 160 ºC, maximum temperature 200 ºC
4. Temperature uniformity: ± 3 ºC (vacuum heating area)
5. Vacuum degree: the minimum is below 10Pa, and the fastest is 4.5min to pump to the vacuum value of 10Pa
6. Transmission speed: 10-1000mm/min, servo motor speed regulation
7. Feeding mode: continuous automatic feeding, up to 10 pieces
8. Discharging method: continuous automatic receiving, up to 10 pieces
9. Typical process of perovskite products:
The conveyor belt conveys the product to the heating chamber, the door of the heating chamber is closed, the vacuum pumping is started, and the heating is started at the same time. After heating to 160 ºC for 10-15 minutes, stop heating and move the product to the outside of the heating chamber. Then enter the insulation chamber, and the temperature of the insulation cooling area is 80-100 ºC, which is mainly to prevent the battery from being directly exposed to the air for rapid cooling and cracking. After slow cooling, the product is discharged.
Pemasok yang Diaudit 
