Solusi Kontrol Akses Pembaca Jarak RFID Hitam Putih FCC

• Type: Custom ID Card Reader/ IC Card Reader
• Card Type: Mifare, EM
• Interface: Wiegand
• Reading Distance: 1-5m
• Application: Parking, Hospital, Library, Company, Bank, Store
• frekuensi: 125khz/ 13,56mhz
• Tidak. Model.: D1001A
• tegangan: 12 v.
• saat ini: 50 ma
• warna: hitam
• sertifikat: fcc
• fungsi: kedap air
• Paket Transportasi: Case
• Spesifikasi: 110x46x20mm
• Merek Dagang: dwell
• Asal: Made in China
• Kapasitas Produksi: 10000PCS/Month

Deskripsi Produk

Access control solutions FCC certificate black white rfid proximity reader 
 

Item model	D1001A
Frequency	125khz / 13.56mhz reader
Input Voltage	12V
Output format	wiegand 26 bits / wiegand 34bits
Reading card	EMID TK4100, EM4200, S50, f08 etc
Ambient Temperature	-25º C to 75º C
Ambient Humidity	10%-90%
Guaranty	Fifteen month quality guaranty

Features:

Wiegand 26bits/ Wiegand34bits Standard Format Data Output
Less than 0.2 second Response Speed
5-10cm Proximity Range
Ambient Temperature: -25º C to 75º C
Ambient Humidity: 10%-90%
Built-in Antenna
Built-in LED (Double Color LED)
Built-in Loud Speaker (Buzzer)
DC 9V-16V Working Voltage. Standard 12V, 70mA Working Current
100 Meters Communication Distance
Real Time Data Transfer
With Water-Proof Function
Audiovisual indication: When a registered card is presented to the reader, the red
LED flashes green and the beep sounds.






Package:
100pcs per carton. Carton Size: 43.5*56*23(cm)
 
 
Packing List:
1*RFID Reader
 
Installation Description
Using + type screw driver to loosen the screw between the panel and motherboard. And then embed the motherboard to the side wall with the plastic plug and screws.
Wire Connection
Red DC 9V to 16V
Black GND
Green D0
White D1
Yellow BEEP
Blue   LED
Grey  Wiegand 26/Wiegand 34( defualt is Wiegand 26 bits, if you need weigand 34 function , connect Grey wire to GND)
Orange  Door Bell
Grown   Door Bell
 
Notice
1. Confirm the electric voltage (DC12V) and differentiate positive anode and cathode of power supply
2. When external Power is used, make sure sharing the power with Controller Box or using the same GND