Baterai Siklus dalam (6DZM)

Dedicated for electric motorcars

Features:

(1) Long life for cycle use

Exclusive lead plaster formula and latest pole plate design greatly extend battery's service life.

(2) Excellent high-rate discharge ability

High tight assembly technology life provides extremely low internal resistance; Excellent high-current discharge performance is at least 20% higher than general batteries.

(3) Lower self discharge

High-purity raw material and special manufacture process; Lower self discharge; And no charge is required even stored in room temperature condition for over half a year.

(4) Good capacity recovery performance.

After repeated over discharge or left alone for a long time after over discharge, the battery's capacity recovery rate remains greater than 90% upon normal charge.

(5) High safety

No free acid exists in the battery, and then no acid leak will occur even it's used in a standing or horizontal manner; A special safety valve is fitted inside, can effectively isolate external sparkle and prevent internal explosion.

(6) Good reliability

Advanced cast welding process is used to enhance polar lines welding quality; Tight assembly design of battery effectively enhances the shaking resistance of battery.

(7) Simple maintenance

Special oxygen absorption cyclic design overcomes the phenomenon of electrolytic dehydration in the course of battery charge, and water in the electrolytic solution remains unchanged in the course of use. Therefore no water supply is required during battery use.

(8) Clean and environmental friendly