Adaptor Daya 10W dengan Kabel

1 Power Supply Description  
This is a series of general purpose AC/DC adapters which convert 100Vac ~240Vac to a
stabilized DC voltage of 5V with rated output current of 2A.
2 Power Supply Frame
Wall mount
3 ELECTRICAL CHARACTERISTICS
3.1 AC Input Voltage and Frequency  
2.1.1 Rated Input Voltage : AC100-240V
2.1.2 Reliable Input Voltage : AC90-264V
2.1.3 Rated Input Frequency : 50/60Hz
2.1.4 Reliable Input Frequency  : 47-63Hz
3.2 Maximum AC Current  
Input rated voltage,Ouput rated load. Input AC Current 0.4Amps Maximum.
3.3 Input Inrush Current
Input 100VAC 60Hz,Ouput rated load(cold start) inrush Current 40Amps peak.
Input 240VAC 50Hz,Ouput rated load(cold start) inrush Current 50Amps peak.
3.4 No-load Loss Power  
Input 115/230Vac,Output no load. Maximum loss power 0.1Watts.
4 MECHANICAL CHARACTERISTICS  
4.1 Bending Test Test the metallurgical equipment with fixed plug,handing weight is 300g,
±60 degrees from side to side, swing 45 times per minute, swing more than 1000 times
( Remark: +/60 degrees, that is to say 120 degrees for a cycle,counting 1 times)
4.2 Tensile Strength Test
put the weight of 4 kg on SR for 1 minute, SR should not shift or damage.
put the weight of 7 kg on DC Cable after 1 minute,inner core shall not break .
4.3 Drop Test  
The adapter shall exhibit no abnormality in mechanical or electrical performance when it is
dropped 6 times to hardwood(20mm thickness) from a height of 1m, with each of
the 6 different sides of the adapter 1 times. The electrical and mechanical performance should
be normal after the tested. Small nicks or slight deformations in the corners of the housing,
or cracks not penetrating the inside may be accepted. (at:25ºC±5ºC).
4.4 Vibration test specifications non-operating with packing
10Hz to 55Hz with sweep at a breadth 2.0mm for 20 Minutes for each of the perpendicular
axes X,Y,Z. After the test the electrical performance shall be normal.
4.5 Salt spray test The most typical of sample surface exposed, Sample pretreatment at 35 ° C for 2 hours in front
of the salt spray test; Concentration of 5% NACL solution, 35 degrees under the conditions of
continuous spray 8 hours, and then moved out for 16 hours to dry. The electrical performance
should be normal.
4.6.1 Input Connection
4.6.1.1 Wall plug or Cord to Cord Type  
For EU
4.6.2 Output Connector  
4.6.2.1 Output Plug
5.5*2.1*10
4.6.2.2 Polarity  
Straight head and flat mouth
4.6.3 Input & Output Cord
4.6.3.1 Length and Cord  
1500mm±50 BLACK
4.6.3.2 Specifition
UL2468,20AWG/2C
4.7 Unit Weigth  
The weight of the unit power supply shall be about 90g(Ref).
4.8 Dimension
L:70*W:40*H:27.5mm